본문 바로가기

Hardware

minix x7 관련 정보

728x90

minix x7 관련 정보

 

Quad-Core Cortex A9 Processor (1.6GHz)
Quad-Core Mali 400
2GB DDR3
16GB NAND Flash
802.11 b/g/n Dual-Band Wi-Fi (2.4GHz / 5.0GHz), USB 3G dongle support (not included)
HDMI™ 1.4a
RJ-45 Ethernet jack (10/100Mbps)
SD/MMC card reader (SD 3.0, MMC V4.41)
USB 2.0 HOST port x 3, Micro-USB OTG port x 1
Headphone Jack, Microphone Jack 
IR receiver (built-in, remote included)
Antenna

 

Linuxium's Bootloader software to dualboot Android and Linux

http://minixforums.com/threads/linuxiums-bootloader-software-to-dualboot-android-and-linux.4213/


PicUntu 4.5

http://www.freaktab.com/showthread.php?7414-PicUntu-4-5-nand-BasicGUI-installer-One-file-few-click-install/page3&s=2501cea0bb4dc15eda342a678b4dea1e


PicUntu on RK3188 base Mini PC,easy install, change your tv sticks/tv box to real linux PC

http://blog.geekbuying.com/index.php/2013/10/12/picuntu-on-rk3188-base-mini-pceasy-install-change-your-tv-stickstv-box-to-real-linux-pc/#.Uw3LOdtKjNv


minix x7 forum (install ubuntu)

http://www.minixforums.com/threads/ubuntu-on-neo-x7.2107/


Now available Ubuntu, Lubuntu or Xubuntu on the latest MK802IV or T428

http://www.freaktab.com/showthread.php?7209-Now-available-Ubuntu-Lubuntu-or-Xubuntu-on-the-latest-MK802IV-or-T428


how to install and hack linux on t428 or mk802 iv mini pcs

http://www.cnx-software.com/2013/12/04/how-to-install-and-hack-linux-on-t428-or-mk802-iv-mini-pcs


rockchip u-boot (rk30xx)

http://dl.radxa.com/rock/source/.ubootrk.tar.gz

u-boot 빌드 (우분투 12.04에서 진행)

#>tar xvf ubootrk.tar.gz

#>cd ubootrk

#>apt-get install gcc-arm-linux-gnueabihf

#>make rk30xx_config ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

#>make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-

부트로더 이미지 ./u-boot.bin 생성


rockchip Kernel repositories

http://linux-rockchip.info/mw/index.php?title=Kernel_repositories


rk3188 generic kernel src

http://gh.codehum.com/omegamoon/rockchip-rk3188-generic


rk3188 QC802 board kernel src

https://github.com/mark-sch/RK3188-Kernel-QC802

linux 빌드(예시 / u-boot 빌드 환경과 동일)

#>cd linux

#>make menuconfig

General setup -> Cross-compiler tool prefix 를 arm-linux-gnueabihf- 로 변경하고 Exit하여 저장

#>make uImage

커널 이미지 ./uImage 생성


rk3188 MK802IV board kernel src

https://github.com/aloksinha2001/Linux3188



728x90